Hidden Hazardous Areas: Where Explosive Atmospheres Form in Ordinary Industries

Ask a refinery manager whether the site has hazardous areas and the answer is yes before you finish the question. Ask a bakery, a joinery or a wastewater plant and there is often a pause. Yet flour, wood dust and sewage gas can all form explosive atmospheres, and regulators in Europe, the UK and North America treat them that way.
This article looks at where explosive atmospheres tend to form in industries that do not see themselves as hazardous, what those places have in common, and how the main regulatory frameworks deal with them.
The pattern: it is rarely the whole site
Most facilities with an explosion risk are not hazardous from wall to wall. The explosive atmosphere forms in specific places, and those places follow a pattern. Four situations account for most of them:
- Inside equipment. Dust collectors, filters, silos, bucket elevators, mills, dryers, digesters and covered tanks. The material is concentrated and enclosed, which is exactly what an explosive mixture needs. In many dust-handling plants the most hazardous place is inside the filter, not on the production floor.
- At points of transfer. Filling, emptying, bagging, tipping, pumping and conveying. Wherever material moves from one container to another, some of it escapes as dust or vapour.
- Where the process creates it. Spraying creates mist and vapour, sanding and grinding create dust, shredding releases whatever was left inside the waste, and charging lead-acid batteries releases hydrogen.
- When the routine changes. Cleaning, maintenance, opening a normally closed system, tank entry or a process upset. Precautions are usually designed around normal operation, so non-routine work deserves separate attention.
Looking at a site through these four lenses is often more useful than asking whether the site as a whole "is ATEX".

Industries that often underestimate the risk
| Industry | Substance | Where to look first |
|---|---|---|
| Bakeries, flour mills, sugar and confectionery | Flour, sugar, starch | Silos, sifters, mills, sugar grinders, dust extraction |
| Grain storage and animal feed | Grain and feed dust | Bucket elevators, conveyors, intake pits, silos |
| Dairy and food ingredients | Milk powder, lactose | Spray dryers, bagging, filters |
| Woodworking and furniture | Wood dust | Extraction ductwork, cyclones, filters, sanding lines |
| Metalworking and foundries | Aluminium and magnesium dust | Grinding and polishing areas, dust collectors |
| Pharmaceuticals and cosmetics | Ethanol, solvents, powdered excipients | Granulation, drying, coating, solvent stores |
| Distilleries | Ethanol vapour | Stills, spirit receivers, filling, warehouses |
| Breweries and maltings | Malt and grain dust | Intake, milling, dust extraction |
| Paint shops and coating lines | Solvent vapour, overspray, coating powder | Spray booths, mixing rooms, drying ovens |
| Wastewater treatment | Methane, hydrogen sulphide | Inlet works, pumping stations, covered tanks, sludge treatment |
| Biogas and anaerobic digestion | Methane | Digesters, gas holders, CHP units |
| Waste and recycling | Residues in aerosols and cylinders, paper and plastic dust, methane | Shredders, waste bunkers, baling areas |
| Coal handling, cement and power | Coal dust | Coal mills, bunkers, conveyors |
| Any site with forklifts | Hydrogen, LPG | Battery charging areas, LPG storage and refuelling |
For the properties behind these risks, see our articles on flash point, vapour density and CO2 inerting in coal grinding.
Dust deserves extra attention
Most people recognise a gas leak as dangerous. Dust is taken less seriously, and two things make it different.
Secondary explosions. A small primary explosion inside a piece of equipment can shake loose dust that has settled on beams, ducts and ledges, and ignite it. The result can be a much larger explosion that travels through the building. That makes housekeeping part of explosion protection, not just tidiness. In US practice, a dust layer of 1/32 inch (about 0.8 mm) is often used as a warning threshold. That is thinner than most people expect.
Particle size. The same material can behave very differently depending on how fine it is. A new supplier, an extra grinding step or a finer product grade can change the risk without anyone touching the process itself. Parameters such as Kst and minimum ignition energy are measured on a specific sample, so they are only valid for material like that sample. Our overview of dust explosion risk parameters explains each one.
Where dust and solvent vapour occur together, as in some pharmaceutical processes, the combination (a hybrid mixture) can be easier to ignite than either on its own.
How the rules compare
The frameworks differ in terminology, but they follow the same logic: identify where an explosive atmosphere can occur, classify those areas, use suitable equipment in them, and keep it that way.
| Region | Workplace obligation | Area classification | Equipment |
|---|---|---|---|
| European Union | ATEX workplace directive 1999/92/EC | Zones 0, 1, 2 (gas) and 20, 21, 22 (dust) | ATEX equipment directive 2014/34/EU |
| United Kingdom | DSEAR 2002 | Zones 0, 1, 2 and 20, 21, 22 | UKEX regulations |
| United States | OSHA 29 CFR 1910.307, NFPA 652 for combustible dust | NEC Class I, II, III with Division 1 or 2 (Article 500), or Zones (Articles 505 and 506) | Certified by a Nationally Recognized Testing Laboratory |
| Canada | Provincial occupational health and safety rules | Canadian Electrical Code Section 18 (Zones) or Annex J (Class and Division) | Certified for use in Canada |
| International | IECEx scheme | IEC 60079-10-1 (gas) and IEC 60079-10-2 (dust) | IECEx certificate of conformity |
A few points worth knowing:
- In the US, NFPA 652 requires a Dust Hazard Analysis for facilities that handle combustible dust, and OSHA runs a National Emphasis Program on combustible dust. The industries in the table above are exactly the ones it covers.
- Class and Division and the Zone system describe similar risks in different ways. Our FAQ explains how they relate, and our North American certifications page lists equipment per Class and Division.
- Equipment certified under one system is not automatically accepted under another. An ATEX-certified device is not by definition approved for a Class I, Division 1 location, and the reverse also applies. Check the marking against the local requirements. See decoding ATEX marking.
- People need competence too. Schemes such as CompEx in the UK and the IECEx Certificate of Personnel Competence internationally cover work on equipment in hazardous areas. Note that "ATEX certification" applies to equipment, not to people or organisations.
A practical way to start
Instead of working through an industry checklist, ask three questions for each area of the site:
- What could burn if it were finely divided or evaporated? Include powders, fuels, solvents, cleaning products and anything stored temporarily.
- Where can it escape or build up? Use the four situations above: inside equipment, at transfer points, where the process creates it, and during non-routine work.
- What could ignite it there? Electrical equipment, hot surfaces, static electricity, friction and mechanical sparks, and hot work.
Where all three answers meet in one place, that place needs a proper assessment under the framework that applies to you, carried out by someone competent in area classification. It is also worth repeating the exercise whenever something changes: a new material, a new extraction system (which itself may create a classified area inside it) or a new layout.
Need equipment for a classified area?
Once your zones or classes are known, Specifex can help you find equipment certified for them, from intrinsically safe phones and tablets to lighting, ventilation and air conditioning, with ATEX, IECEx and North American certifications. See explosion-proof equipment selection, select your hazardous area, or request a quote with your zone and application.
-

Understanding Ingress Protection (IP) Ratings: Safeguarding Electronics in Challenging Environments
Protecting electronic equipment from environmental hazards is crucial in industrial settings. Ingress Protection (IP) ratings show how well an …
-

Understanding Methods of Protection in Hazardous Environments
Hazardous environments are areas where flammable gas, vapor or dust can form an explosive atmosphere. Therefore, they require specialized equipment …
-

The Crucial Role of CO₂ Inerting in Coal Grinding
CO₂ inerting is one of the most important safety measures in cement plants, yet it often goes unnoticed. The technique reduces the risk of coal dust …