ATEX Zone 2 Equipment for Hazardous Gas Areas

ATEX Zone 2 equipment suits areas where an explosive gas atmosphere is not likely in normal operation. If it does occur, it lasts only a short period. This collection combines Category 3G devices with higher rated models. It includes Ex-Machinery air conditioners, Getac and i.safe MOBILE tablets, Xciel iPhone and iPad cases, phones, fans, lighting and torches.

Therefore, one range covers a Zone 2 hazardous area from climate control to handheld devices.

160 products

What Zone 2 equipment must comply with

ATEX Directive 2014/34/EU covers equipment for potentially explosive atmospheres placed on the EU market. Within equipment group II, Category 3G with protection level Gc corresponds to Zone 2. Category 2G and 1G devices hold certification for Zone 1 and Zone 0. Consequently, they also qualify as Zone 2 hazardous area equipment.

Is your project outside the EU? Then look for IECEx Zone 2 equipment. IECEx is an international certification system based on the IEC 60079 standards, and markets outside the EU widely accept it. For North America, many items here also carry a Class I Division 2 (C1D2) marking. A few models, such as the Ecom Ex-Handy 10 DZ2, add a Class I, Zone 2 marking.

How to choose an ATEX Zone 2 device

  • Zone and category: check that the marking shows 3G or Gc at minimum. Do you also have combustible dust on site? Then see our Zone 2/22 equipment.
  • Gas group and temperature class: IIC is the most demanding gas group and includes hydrogen and acetylene. The temperature class limits the maximum surface temperature, for example T4 to 135 °C.
  • IP rating: the first digit stands for dust and the second for water. Getac tablets here range from IP65 to IP67, while i.safe MOBILE phones list IP68.
  • Fixed or portable: choose installed equipment such as climate control and lighting, or handheld devices such as phones and tablets.
  • Device or case: pick a purpose-built Ex phone or tablet, or an Xciel case for an iPhone or iPad.

Category 3G equipment and higher rated models

Most ATEX Category 3G equipment in this collection comes from a handful of brands. Ex-Machinery supplies wall mounted, cassette, ducted and ceiling suspended air conditioners in gas group IIB (+H2) with T3 or T4. Getac covers tablets such as the ZX70 EX and F110G6-EX, and i.safe MOBILE adds the IS530.2 and IS655.2 smartphones. Xciel XCiPhone and XCRiPad cases carry Ex ic IIC Gc markings for iPhone and iPad models. Furthermore, Armadex offers a camera, a keyboard and a Wi-Fi antenna.

This ATEX Zone 2 equipment range includes higher rated gear as well. Ventinet fans cover Zone 1 and Zone 2, and Peli Z0 and NightSearcher SafATEX torches go up to Zone 0. Browse by product type in Zone 2 air conditioners and Zone 2 tablets. For North American projects, switch to Class I Division 2 equipment. Finally, our guide to reading an ATEX marking explains each code.

Frequently asked questions

What equipment can be used in ATEX Zone 2?

Category 3G equipment with protection level Gc matches Zone 2. Category 2G and 1G equipment is suitable too, because it holds certification for Zone 1 and Zone 0. This collection therefore lists all three categories, from air conditioners and tablets to torches.

Which Ex tablet or iPad solution can I use in Zone 2?

Xciel XCRiPad cases carry Ex ic IIC Gc markings. They fit the iPad 10.2, iPad 10.9, iPad Mini 6 and iPad Pro 11. In addition, Getac, i.safe MOBILE and Bartec supply dedicated Category 3G tablets. The Ecom Tab-Ex 04 Pro is a 10 inch Android tablet for Zone 2.

Do I need ATEX or IECEx certification for Zone 2 equipment?

Inside the EU, Zone 2 equipment needs ATEX conformity under Directive 2014/34/EU. Outside the EU, buyers widely accept IECEx, the international system built on the IEC 60079 standards. Its certificates are public in the IECEx online database, so you can look up any certificate there.