Bartec Hart Add-On Module for Agile X IS
Bartec Hart Add-On Module for Agile X IS
Made To Order
The HART Add-on Module is a new extension module for Agile X IS and offers a HART modem function. It may be connected to a HART loop as a secondary master and facilitates applications such as configuring the HART devices.
Due to the Windows operating system, the user can deploy all current software solutions and communicate using the FDT/DTM industrial standard.
Agile X IS equipped with the HART Add-on Module is the new safe solution when working in potentially explosive and non-potentially explosive atmospheres: parameter assignment, configuration, measurement, and office tasks can be carried out much easier, faster, and more safely.
The HART Add-on Module for Agile X IS is approved for ATEX and IECEx Zone 1 and for NEC 500 Class I Division 1.
Bartec Hart Add-On Module for Agile X IS
Explosion Protection
- Marking: ATEX Ex II 2G Ex ia [ia Ga] IIC T4
- Certification: EPS 15 ATEX 1 069 X
- Marking: IECEx Ex ia [ia Ga] IIC T4
- Certification: EPS 15.0065X
- Marking NEC (USA/Canada): Class I Div 1 Groups A, B, C, D T4
- Certification: CSA 70045374
Product Specifications
| User Environment | |
|---|---|
| Operating Temperature |
in the Ex area: -20 °C to +50 °C (-4 °F to 122 °F) in the safe area: -20 °C to +60 °C (-4 °F to 140 °F) |
| Storage Temperature | -30 °C to +70 °C (-22 °F to 158 °F) |
| Relative Humidity | 30 % to 95 % (non-condensing) |
| Protection Class (IEC 60529) |
mounted on tablet PC: IP 54 connector strip (PoGo pins): IP 20 |
| Technical Data | |
| Size (H x W x D) | 125 x 125 x 24 mm (4.9 x 4.9 x 0.9 inch) |
| Weight | 200 g (0.44 lb) |
| HART Interface |
Ui ≤ DC 30 V I ≤ 130 mA Pi ≤ 1 W Uo ≤ DC 3 V Io ≤ 10 mA Po ≤ 5 mW Um ≤ DC 60 V max. cable length = 1.8 m |
| Energy Management | Power supply is via the extension interface of the Tablet PC |
| Connection Requirements |
HART loop connection The HART Add-on module may be connected to a non-certified HART device. Prerequisite: Um = 60 V or Ui is not exceeded! |
| HART Interface |
Function as secondary master DTM communication driver supports FDT version 1.2.1 DTM communication driver supports network read/write/check/search (topology scan) Burst Mode is not supported by the communication driver HART-Protocol supports version 5, 6, and 7 |
| Communication to the Host (Agile X IS) | Via the extension interface of the Tablet PC |
| Warranty | 1 year |
| Scope of Delivery |
– HART Add-on Module – Screws – Cable set – Installation instruction |
| Ordering Information | |
| HART Add-on Module | 17-A1Z0-0005 |
- Choosing a selection results in a full page refresh.
- Opens in a new window.